• bisby@lemmy.world
    link
    fedilink
    English
    arrow-up
    96
    ·
    6 days ago

    Stick drift isn’t when the sticks fail to recenter (which is what this would help with).

    Stick drift is when the electrical contacts inside the stick change over time and as a result the electrical signal changes over time. A perfectly centered stick might have the same signal as slightly off to the side. (Which this wouldn’t help with)

    • Anivia@feddit.org
      link
      fedilink
      English
      arrow-up
      6
      ·
      5 days ago

      But the rubber bands might be set up in a way that they sticks are slightly off center, at the exact position needed to cancel out the stick drift

    • Vilian@lemmy.ca
      link
      fedilink
      English
      arrow-up
      2
      ·
      4 days ago

      Stick drift never existed before Xbox 360 and ps3, actually the first version of ps3 controller didn’t have stick drift, it’s made problem

      • bisby@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        ·
        4 days ago

        The physical mechanism that causes stick drift exists in all controllers that use resistance of electrical signals instead of something like hall effect sensors. If you have metal sliding over metal, it’s going to degrade over time. It’s very possible the early controllers had stick drift, it just wasn’t noticeable because it was so bad that every early console just had horribly large dead zones. Only the Sega Saturn and Dreamcast used hall effect joysticks back then and that never caught on. So I guarantee that with enough time, a Dual Shock controller would also develop stick drift.

        And sometimes things like this are just a thing that happen when you miniaturize electronics. An xbox controller does a LOT more than an atari 2600 controller did, in less space. Cramming more stuff into less space means everything has to be tinier. and when you have abrasive metals rubbing against each other, and the metal is thinner, it’s going to wear out faster. They’ve flown too close to the sun in some cases and they wear out WAY too fast. Which is a widespread problem but not so widespread that there are no working controller. Clearly what they are doing still works.

        This isn’t nearly as much of planned obsolescence as you would think. They just release a new generation of console and make it not backwards compatible with older controllers for that. This is just that as things get more complex, they become more fragile. I would much rather play Elden Ring on an xbox controller that might get stick drift than an atari 2600 joystick.

    • Eyron@lemmy.world
      link
      fedilink
      English
      arrow-up
      10
      arrow-down
      1
      ·
      edit-2
      5 days ago

      It can be pretty easy to get up a second-hand console cheap, free, and/or as a gift.

      Have you ever seen how much good/working stuff people throw away? If you’re a little bright, you can get people to pay you to haul their “junk” away.

      • somebodysomewhere@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        5 days ago

        definitely more common now at least in my area. When I was a kid goodwill and value village were charging $40 for an old beat up snes or n64 and that was the whole clothes budget for me and my three siblings.

        Friend ended up giving me a gamecube in middle school and that was my first console.

  • boonhet@lemm.ee
    link
    fedilink
    English
    arrow-up
    29
    arrow-down
    3
    ·
    6 days ago

    I grew up poor. What drift? I grew up on mouse and keyboard because a computer was also useful for schoolwork and it’s not like it was a gaming PC anyway, it was really crappy but could play GTA San Andreas at 20 fps.

    Keyboard and mouse cost like 5 euros a piece to replace, though I don’t believe I ever needed to replace a keyboard.

    • Chee_Koala@lemmy.world
      link
      fedilink
      English
      arrow-up
      13
      ·
      6 days ago

      Can’t have drift if you don’t have analog controls ¯_(ツ)_/¯ The pain I experienced as a kid was finding a PC controller, working a full day to get the thing working, only to realize it is complete ass, man did I respect console controllers after that.

      • Wwwbdd@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        5 days ago

        Oh man I remember that controller. There was a little stick you could screw into the d-pad that was a bit of help for some games, but it was all pain after a while

    • otp@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      8
      ·
      6 days ago

      I grew up poor. What drift? And what mouse?

      My NES and 6 games were absolutely fantastic in 1996, thank you very much

  • Mossy Feathers (She/They)@pawb.social
    link
    fedilink
    English
    arrow-up
    20
    arrow-down
    2
    ·
    6 days ago

    That’s not how stick drift works. If that worked, then recalibrating the controller should work. Secondly, I guess you weren’t the kinda kid who loved taking things apart and putting them back together again. Fixed stick drift on a joystick when I was a teenager by taking the joystick apart, cleaning the sensor and putting it back together again. Had no clue what I was doing and this was before youtube, yet I still managed to do it right.

  • fenrasulfr@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    5 days ago

    I must say, I must have gotten lucky for years while gaming because I had never experienced stick drift and only heard of it in the last few years.

    Broken buttons, that I did experience.

    • Albbi@lemmy.ca
      link
      fedilink
      English
      arrow-up
      3
      ·
      5 days ago

      I used a broken bit of popsicle stick to run in circles on Quest 64. Running is all that was needed to increase your dex. Left it on all day and boom, max dex when I got home.

  • Zement@feddit.nl
    link
    fedilink
    English
    arrow-up
    8
    ·
    6 days ago

    I learned to solder, and now here we are. 14 years later I still have to solder different potentiometers into my controllers. (Hall)

  • Etterra@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    5 days ago

    Although it does remind me of grinding to level up familiars in Castlevania SotN on OG PlayStation.