I’ve got several of these empty steel propane tanks from heating the chicken coop during the recent cold weather before I got an adapter to run the heater off of a larger refillable tank. Any ideas on what they could be repurposed for?
Seems like there should be some use for them besides tossing them in the recycling. I’d assume I’d need to poke a hole in them before recycling since they are/were pressure vessels.
I know there are adapters out there to refill them but now that I can use a larger, more easily refillable, tank I don’t really have any inclination to do so.
My only thought so far was to cut the top off, drill some holes, and make a little stick burning camp stove. But, that’s not something I’ll ever use.
I’ve got a fairly extensive workshop and metal working tools so pretty much everything is on the table. I can even do really shitty welding if required.
Important! Before you drill, cut, puncture or do anything with them you need to remove the residual gas or they may explode on you!
- obtain or make a valve tool for propane cylinder valves (check youtube).
- screw on a torch head and try to light it to burn off as much as you can EVEN WHEN THE TORCH WONT LIGHT THERE IS STILL PROPANE IN THE CYLINDER
- outside in a well ventilated area remove the torch and press the center valve in to verify that pressure is equalized
- look for the fill valve off center on the top, using the valve tool remove the valve.
- fill the cylinder ALL THE WAY with water, this will force out any remaining gas.
- the cylinder should now be safe to work on
This guy Propane’s, I tell you whut.
Wonder hwut he thinks of butane.
I tell you wut, I prefer propane and propane accessories
Nothing. It’s why they are being phased out. recycle them at any place that sells propane tanks.
I hadn’t heard that. What are they being replaced with?
Reusable ones. Looks like it’s only California: https://www.msn.com/en-us/money/other/camping-with-propane-canisters-in-california-is-set-to-change-how-to-choose-what-to-buy-now/
They’ve always been refillable with an adapter from the hardware store but it’s an enormous pain, so few people bother. I’ve always hoped Coleman would start an exchange program at REI or somewhere similar.
If I recall, the adapter hooked to a grill tank but to fill the green cans you had to have the larger tank above the smaller one and it’s impractical for most people.
And upside down, and that will still only fill it 2/3 or 3/4…
I’ve read tricks like chilling the cylinders. And depressing the Schrader valves. But some sound pretty sketchy.
Put them next to chickens and take a photo that makes it look like you have enormous chickens.
Here you take them back and you get a discount off the next one.
I refill and reuse mine, I got an adapter I can use a grill tank to fill them up with and take them camping for my lantern and camp grill
I would take them to a recycling center that advertises that they accept fuel / propellents.
Terrorism.
*resistance
Tomato/tomahto
Mini Probot of course…
You could refill them then give them away.
Exactly. The hose to refill them from a propane tank isn’t that expensive, and it will save you loads of money in the long run if you go through those small tanks at any reasonable pace.
They’re fun to use as shooting targets, just do it at 100+ yards
Under no circumstances should you puncture the container. It’s still a pressure vessel with flammable gas in it and will explode if you try.
You’re not my supervisor!
You can get adapters to partially refill them from the 20lb bottles.
Maybe you could use them to store gas
In my country if you get bottled gas supplied on contract, the cylinders usually remain the property of the supplier. They’d’ take them back and recycle, or the vendor should take them and pass them back.
Turn it into a big ass flask, they can’t arrest you for drinking good 'ol clean burning propane, I tell ya hwat
Given that alchohol could concievably be a fuel, you might have something there.
