Apologies for the poor grammar, English IS my first language and so I’m rather flagrant with runons.
I’m really not half as tech literate as half the people on the fediverse, but my noia about the state of online cloud hosting and lack of control over my data has led me far out of my depth. I’m wanting to set up a LibreCMC router and connect it to some type of home server (made of local office E-Waste) for media storage, email hosting, and fucking Minecraft servers or something. I promise I’ve tried my best in searching for the problem but often find myself floundering in 3-letter acronyms, and relations between systems I don’t understand (like dockers, or the Jellyfin vs Plex argument.) I don’t need an explanation but maybe some orientation on where I am to look for resources on these topics that assume I’m the 6 celled neurobase I am.
Thank you for your help, or your chastising.
Edit: thank you everyone for your replies! I’ll hopefully keep you all updated as I work through learning Linux terminals, and destroying terabytes of data in horribly predictable mistakes : )
I hope someone else can pitch in with a more indepth instructions, but two things I wanted to mention:
First, forget about hosting your own email from home. Seriously. Even those who do it professionally don’t want to deal with that at home. You’ll find people on fediverse who do it but I’m sure plenty will give you this same recommendation/warning. It’s a huge hassle and it’s so easy to get your domain blocked/ending up on a blacklist and way harder to get out of it.
Second, I can personally recommend https://linuxupskillchallenge.org/ if you are really starting from scratch ( there’s a community here: !linuxupskillchallenge@programming.dev ). This is how I started and set up my own linux server and started self hosting stuff on it. It’s really basic and won’t teach you everything you need but it’s a great start for setting up your own server. You can do everything with a local server at home that you have set up.
Yeah, email at home sucks. Even if you wanna selfhost you wanna do it with a static ip and an rdns pointer to the email server and good luck getting that at home.
Oh shit that first link is exactly something I’ve wanted for years. I’ve been linuxing from gui for a while and would like to know more, especially as I fuck around with my home server
Do it, 100% worth it! Also has some extra stuff for already-experienced users if it gets too easy :)
I run my email server, but not at home. Running it at home is not all all more difficult, but it will only work for internal traffic and inbound from the internet. Residential IPs are simply blacklisted by ISP and as such - nothing will reach external recipients. Still useful, but is limited.
To have your smtp reach everyone globally you need to run it on a business IP. I use Linode, has worked very well since the setup in 2019, although they did get acquired by Akamai, which might become an issue at some point.
Been running my email server on a resi IP for two decades, without PTR records, and never had to deal with a blacklist by any major players. Maybe because I’m not on some big ISP.
Huh, TIL that’s still possible. Wasn’t in my case at the time.
Omg thank you so much for providing that first link. I’ve wanted to try Linux and to run a home server, but I am like OP. I’m not as tech illiterate as most, but I also don’t know nearly as much as others here. I know just enough to not fuck up my pc, but I had trouble finding a start from the basics instructions.
The Linux skill challenge looks like exactly what I wanted,
I had the same issue, this is indeed perfect for that level and a nice cozy start for your server admin journey :) I hope you enjoy it as much as I did!
I got started self-hosting using a small Lenovo Thinkcentre and an HP EliteDesk. Both are available to purchase for around 100 dollars on ebay. I have installed Proxmox on both of them. Proxmox is an operating system built on Debian Linux and is used to host containers and virtual machines. It has a great WebGUI to access the server.
Using Proxmox I have set up a Pelican container for game servers hosting, I run my own personal wiki, I have PiHole, Jellyfin, Audiobookshelf and a lot more.
To access your things out of home you can use a VPN to connect to your own network or open ports in your router. I only had to open port 80 and 443 to expose my reverse proxy to the internet and then I use the reverse proxy to route the traffic internally to the correct port and project. I also purchases a domain name and now I can use jellyfin.mydomain.com or wiki.mydomain.com or whatever.mydomain.com to access each project I self-host. It’s very convenient!
Trying new projects is super easy and if you want to remove something then just delete the container. No old leftovers will stay on the host system. There are also community scripts available to make hosting even easier. It will install and configure the containers for you.
I think your best bet is to pick one thing that you can get a good guide for and start from there. If you really want to learn its probably better to start with a Debian or arch setup than proxmox, but that’s really going to depend on what you really care about learning.
I know it will be an unpopular opinion but you can use perplexity or Claude to help you find useful sources online if you’re striking out on your searching. Most of the time I find they do better with more obscure issues, but those should be rare if you’re following a guide
Using an AI is a great way to get learning materials tailored specifically to you.
But after you’ve learned from it, before you move on to another topic, you HAVE to verify your understanding against more trustworthy sources that you previously couldn’t understand. Ideally with an online course that actually gives you a test.
but you can use perplexity or Claude
For things that are not super complicated, Grok is pretty fair but it has it’s limitations when you get into complexities. At the very least it gives you something to go on for further reading of a topic you don’t necessarily have a firm grip on. I’ve also found that if you ask a question, finish up with ‘explain it for a noob’ or ‘EILI5’. That seems to get the more accurate, step by step instructions, broken down into bite sized chunks, and doesn’t assume you know what to do in between steps.
I find LLMs make a lot more.mistakes when they try to distill a guide down to steps. Its not a bad summary, but they to get confused sometimes when there are forks in the guide. That said they are really good at finding guides, especially older ones that SEs tend to not place as high
Maybe I can start shedding some light off docker.
When you start setting up a server, you end up having to setup many things. You install various programs and their dependencies. Sometimes those dependencies can conflict with each other, or you mess up your system by manually pasting some command you found on stack exchange. Then you need to manually keep all the software you use up-to-date and pray they don’t brick your server and force you to start over. And then when you need to update your OS or move to a new machine, you need to repeat this whole dance again.
Docker is like legos. You want to install jellyfin? There’s already a docker imagine for that. You just spin it up with some little configure file and you’re done. You want to setup a firewall? You want to setup https access? Automatic updates? There are docker images already made for it.
So you keep on setting up those docker containers and they all run in isolation but can communicate with each other. If you break something, you just restart one or all the containers and you always start fresh. Docker keeps nothing in memory, unless you explicitly want it (e.g. Your jellyfin config will presist in external config files).
Want to move to a new machine? You can just copy over the scripts that run the docker containers and those config files. Software updates? Just update the docker container and it handles all dependencies.
Also, Jellyfin all the way. It’s open source and free all the way.
Honestly I’d like to say that docker is pre-built legos. Instead of putting it all together yourself you get it all built and ready to go.
Haha OK. DIY server is like legos, docker is playmobil.
If you go for openwrt instead of librecmc the amount of guides and docs will skyrocket.
Compatible hardware for openwrt is found here:
https://toh.openwrt.org/?view=normal
A tip is to sort on the 5.0GHz table so all the devices that support ac and ax (newer wifi standards) are shown first.
They have a lot of good guides here:
https://openwrt.org/docs/guide-quick-start/startRegarding home server you would want to decide on the host operating system first. Examples are proxmox (hypervisor, controlled mainly through a web ui), a standard linux server with kvm/qemu and docker, openmediavault (NAS operating system) or Windows 11 with HyperV (please don’t).
First thing after that is to figure out of to make and restore backups of the system. Knowing that you can restore everything to how it was last night makes tinkering a lot less frustrating. Proxmox has builtin backup systems, with linux I like BORG Backup.
Regarding services you will want to read up on dockers and find a docker management system you like. I run portainer, others swear by dockge and yet some prefer the command line.
Regarding video streaming; If you don’t a lifetime license for Plex I would go for Jellyfin. Plex free is continuing to lose, not gain, functions as of now.
Immich is popular for photo storage.
Regarding game servers I think https://pterodactyl.io/ is popular to make it simpler but you can probably find a plain docker image to host minecraft. If you wanna mod mc I know Pterodactyl makes it simpler to add mods on the server.
Selfh.st is a great directory and newsletter.
What’s the question
