I forgot I even did this but I’m coming up on 10 years in just a couple weeks.

I’m not in software but from what I read the importer sends a request and that request is used by the exporter and importer to encrypt and decrypt, so I think there’s a way to tweak the whole process a little and instead have both the exporter and importer ask Netflix or whoever to provide a key as opposed to using the request. Could be wrong tho

I’ve been getting better at making small but meaningful changes to my life by recognizing that a lot of it is simply habit/routine, making an earnest effort at thinking of ways in which I can modify them, and making an earnest effort at applying them.

Very generally: Think of something I do that I might want to curb, think of why that thing is what I do, think of things I could do that would impede on my ability to do those things, and implement those changes.

Couple specifics:

I’m fond of beer. I don’t binge or anything but if it’s in the fridge I’m probably gonna grab one every couple of hours, and that’s not too healthy and kind of a waste of money, so now, when I buy beer I just toss a couple cans in the fridge and put the rest in the cabinet above the fridge. If I run out I’ll toss a couple in the next day. Now I drink a lot less because I’m not gonna drink warm beer and when I open the fridge I see the scarcity and tend to just shut the fridge and walk away.

I’m an introvert and I love reading about things and events, non-fiction crap, walking around on Wikipedia and stuff. It drives my wife up the wall when I’m doing and I don’t blame her because I’m bad at listening when I’m not giving my full undivided attention, so I removed all my phone chargers except for the one in the bedroom. Now, I just set my alarms and plug in the phone, walk into the other room, get out of that headspace, and engage my wife in conversation.

I just thought it’s funny that AI can’t determine I’m talking about memes. It’s like, look, Gemino bro, all I use you for is making Garfield and Shrek comments

I actually googled that to try to pull a screenshot and the AI summary told me to go to a doctor

Giving me Don Hertzfeldt’s Rejected vibes, if you haven’t seen this it’s hilarious and is probably slightly older than Youtube. There’s irreverent, and then there’s this

They behave exactly like black mold. They start coalescing in some adjacent space and suddenly BOOM. Online storefront, starts hosting its own servers, that becomes part of the business. Starts building out warehouses, that becomes part of the business. IoT things that run on their servers, then cameras, gobbles up Blink. They even had a pilot project for restaurant delivery, we’ll probably see that again once they can tie it into their parcel delivery fleet

A couple companies make them like TunerRack but I think the biggest issue is that it’s no longer compatible with the scissor jack. A couple other issues are that the ones that use grub screws to pinch the welds can come off if the grub screws back out from vibration, and the kinds that require drilling sometimes develop obnoxious rattle if they wind up having play.

But the most unintended outcome of all this is usually those things are nice shiny anodized bits, so people tend to still use pads, which kind of defeats the purpose

We evolved to have that response in a world in which hospitals didn’t exist and in which we faced predation by other animals, and ‘curl into a ball feeling like shit for a couple days’ was the most viable way for the body to handle even the most mundane of infections (all the other ideas didn’t make the cut and here we are). But now, 21st century, we’re like ‘oh it’s just the cold’ and actively attempt to mitigate it.

A slew of other things are still stuck in 20,000BC as well, like our bodies not being able to deal with copious amounts of sugar, or thinking we might have difficulties securing our next meal. Cut too many calories trying to lose some fat and your body legit thinks you’re dying and starts breaking down all sorts of soft tissue that isn’t fat. Or vasoconstriction when we’re out shoveling snow with a warm house 15ft away, all sorts of shit

The shitty thing is that if margins are high enough only a very small minority of owners need to subscribe in order for them to break even and then we get stuck with it for eternity like SiriusXM being implanted into practically everything.

And of course there’s no way to just ‘opt out’ of the hardware via trim levels. Shitty industry in general

Yeah it’s horrible, but I think it’s made even worse because the premise and concept sounds like it’d make for a really great game. An open world sandbox of ass kicking, like Hell’s Angels meets Fallout with a destructable/interactable environment. It’s such a good idea but unfortunately Rockstar didn’t pick up on it and we got this instead :-/

Some games would simply not install on a second or third machine without getting permission from the publisher.

I remember binning DDR2 RAM on a test bench back in the day and Windows deactivated itself after about a dozen times lol

That image is of the bus so it probably requires a ‘fleet’ type purchase alongside a maintenance contract

It’s kind of fun like 3D jigsaw puzzles but I’d honestly rather not be fixing things so much. We got this new place, inspection turned out fine, but turns out previous owner didn’t find a single stud and used 1" screws on everything in the drywall. Had to redo all the closet shelves, hang closet doors, you name it lol

I think the half of the dash and the entire center console on a G37 was about the trickiest thing. Center console lid has a little gear-driven mechanism and you need to flip the entire console upside down to fix, but I needed to stop everything and go to the dealership for a little plastic cog.

But we’re in the middle of moving into a new place and our dishwasher was leaking so I pulled the entire ‘tub’ yesterday and inside front panel off to see if fitment was an issue, mostly wasting time while a couch was scheduled to be delivered, so I stopped the dishwasher project to assemble the couch (power reclining thing), then had to put the entire thing back together afterword (one of those Maytag ‘chopper’ models with a built in food disposal thing). But to pull the tub I had to remove the heater blower and chop chop thing and the control board and the water jets and all that… And then I realized a new dishwasher is like 500 bucks lol

I wouldn’t call it a skill but I’m really mechanically decent (3D puzzles and Rube Goldberg aptitude, that kind of thing), and my visual memory is really good, so I have the uncanny ability to tear apart household appliances, do something else for hours or days, then return and slap it all back together about as quickly with no leftover mystery screws. I just look at the shit all strewn about, and can somehow recall the very last thing I was holding and work backwords

Title is fucking metal. Box is wild. Panned as one of the worst games ever made

But you think it’s uplifting the American public is being lied to a month before the election with a promise that has 0% chance of coming true?

Fiscal Year 2025 started October 1st, Congress approved a stop gap so they can continue appropriations. You think a president shouldn’t announce anything or do anything in the months leading up to an election?

Also, it’s lead pipes. We don’t use them anymore. Every pipe replaced is a step forward. Biden just announced a deadline.

They’ve been consistently disbursing funds for this and this time is no different. Here’s last May’s news : https://www.epa.gov/newsreleases/biden-harris-administration-announces-3-billion-lead-pipe-replacement-advance-safe

For me it’s the difference between a preponderance of evidence suggesting such, and something being applied and proven until any doubt is removed.

For example, I was trying to find studs in drywall recently (last house was plaster and lathe), and looking at things Socratically, I could use a stud finder but I might be drilling into conduit or a pipe. So I was like “I can use magnets to hit drywall screws to try to confirm the presence of a stud”, and it seems reasonable, but I’ve never attempted it in practice, and there could be all sorts of things a magnet could hit, since I’ve no experience with drywall, how close a steel pipe could be, any of that. So it’s a belief. It’d be rather arrogant of me to accept this as a reliable method without testing this method, drill through a pipe and wind up with egg on my face.

So, I tested this by getting two magnets to stick vertically, then measured 16" out, got 2 more magnets to stick vertically, kept doing that until I hit half a dozen spots, all 16" apart. Drilled a pilot hole, felt resistance and the smell of wood, drilled a couple more.

I think somewhere between mounting a flat screen to fixing 3 closet shelves it became knowledge, not sure exactly when, but all the doubts were removed and it never blew up in my face. I can just waltz in a room and sink a bunch of holes in the right spot now without being skeptical of some electronic stud finder.

I guess what I mean to say is that testing something and having it consistently work and be reproducible is what leads to knowledge imo

Pretty much.

AI: You don’t have to use plastic! Silicone, graphite, ceramics, glass, woods, and aluminum can all be used as substitutes and often have more desirable physical properties for specific applications.

CEO: I hear you, I really do, but scientists already recommended this and we’ve already done numerous analyses that have all concluded that it’d be too costly to implement and would leave us with products that aren’t competitive.

CEO: …Could you figure out how to increase our gross margins by suggesting changes to these designs?

AI: Sure! We can start by replacing those braze-on threaded nuts with a plastic clamp. I suppose that lag bolt could be plastic as well.