• Corroded@leminal.space
    link
    fedilink
    English
    arrow-up
    32
    arrow-down
    1
    ·
    edit-2
    11 months ago

    People I used to work with refused to wear gloves and eye protection when handling fuel because “that’s gay”.

    They all have alligator hands now.

    • NaoPb@eviltoast.org
      link
      fedilink
      English
      arrow-up
      7
      ·
      11 months ago

      I did not know fuel is bad for your hands. Though I only really might touch it while filling ny car up.

      • Corroded@leminal.space
        link
        fedilink
        English
        arrow-up
        14
        ·
        11 months ago

        I don’t imagine you have to worry about it. It’s more of am issue for them because it was frequent excessive lengthy exposures. It wasn’t helped by the fact that they didn’t wash their hands a lot.

      • QuinceDaPence@kbin.social
        link
        fedilink
        arrow-up
        9
        arrow-down
        3
        ·
        edit-2
        11 months ago

        Occasional exposure isn’t going to do much. Some people even use kerosene (diesel) can be used to wash some things off your hands. But you want to avoid it when possible.

        Another reason I hate the EPA “safety” gas can nozzles. Because I’ve never felt more safe than when I’m covered in gasoline.

        • skyspydude1@lemmy.world
          link
          fedilink
          arrow-up
          6
          ·
          11 months ago

          Generally, I’m all for things that limit emissions and improve safety. I always thought they were a PITA, but couldn’t really be that much worse than the ones I see people use at the track usually.

          I finally picked one up because it was all they had at the store, and holy shit those “safety tanks” are a nightmare by comparison. They spill so much fuel and after only a couple of years the seals on mine have gone bad and leak even more. I still would like to add a flame arrestor into the necks, but it amazes me at how awful they are.

          I wholly understand why they exist and what all the safety features are for (preventing fuel from spilling if they’re tipped/dropped, releasing fuel vapors, etc) but they seem utterly useless when I inevitably spill at least half a cup of fuel per 5 gal, just due to how poorly they’re made.

      • xkforce@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        11 months ago

        Fuels are mostly hydrocarbons and those are hydrophobic and lipophilic. i.e they dissolve greasy/fatty things and your skin contains oils (which the fuel dissolves and thus strips out) and your cells are basically bags of water where the bag part (cell membrane) is made up of phospholipids (basically a type of fat) so that gets degraded too. None of that is good for your skin.