Gonna put up an ip camera in the garden and see what wildlife comes by at night.

Edit: job completed. Frigate is pulling the stream…

    • CompactFlax@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      16
      ·
      3 months ago

      There’s a specific jacket material that makes it outdoor rated. It is UV resistant and handles temperature variation better. Some are gel filled so that there’s water resistance too. If it’s being buried you need the gel; if it’s an aerial cable you need shielding. The jacket material, gel, and shielding all make the cable harder to work with, and more expensive.

        • bobzer@lemmy.zip
          link
          fedilink
          arrow-up
          1
          ·
          3 months ago

          I really doubt shielding will make a difference. It’s mostly useful for running it along power lines, through factories or places with lots of EM interference.

          I should hope OPs garden is pretty quiet.

    • redlemace@lemmy.worldOP
      link
      fedilink
      arrow-up
      11
      ·
      3 months ago

      Nothing. Looked at work what we had, and outdoor cable was there. We rarely use that so i was welcome to use it

      • FauxLiving@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        3 months ago

        It’s been a while since I did cabling but I think there’s a specific jacket material (CMX?) that you need to do direct burial.

        I could also be wrong and PVC is fine as long as you seal the ends.

        I like conduit because I can easily expand capacity/repair/whatever with a vacuum, paper towels and some string.

        • fleem@piefed.zeromedia.vip
          link
          fedilink
          English
          arrow-up
          2
          ·
          3 months ago

          yeah DB is certainly more expensive, for whatever it’s made from. also it’ll have some grease or powdery stuff inside the insulation.

          conduit was always my favorite also!

    • redlemace@lemmy.worldOP
      link
      fedilink
      arrow-up
      8
      ·
      edit-2
      3 months ago

      When used for [10/100/1000] BASE-T (which I do), the maximum length of Cat 6 cable is 100 meters.

      (Frigate is already pulling a steady and stable stream)

    • Denjin@feddit.uk
      link
      fedilink
      arrow-up
      5
      ·
      3 months ago

      CAT6 is rated for 10Gbps up to 55m or 1Gbps up 100m. In reality, outside with no other RF interference sources speed losses upto 100m are going to be negligible even on CAT5.

      Even a 4k video stream only uses 24Mbps on average so whatever you use above CAT5/5e would be more than enough.

    • redlemace@lemmy.worldOP
      link
      fedilink
      arrow-up
      6
      ·
      3 months ago

      Cable was for free (perks of the job) I only use reolink ip camera’s for they work perfectly well without cloud (i’m self hosting frigate).This one is an rcl-510A. It’s only disadvantrage: you need to use their app once (still no cloud required) to activate web and rtc etc. I always buy from their refurbished deals.

  • twinnie@feddit.uk
    link
    fedilink
    arrow-up
    2
    ·
    3 months ago

    What did you do to secure your network? I always thought the problem with these is that somebody could just pull the camera down and connect into the home network. I’m paranoid about this stuff though.

    • redlemace@lemmy.worldOP
      link
      fedilink
      arrow-up
      4
      ·
      3 months ago

      It’s low risk, it’s quiet here … Not visible from the road, only 5 houses in a 1km radius.

      But everyoutdoor cable is in it’s own vlan with a /30 subnet and with nowhere to go (i only pull from those devices)

  • PartySlices@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    3 months ago

    I haven’t made a cable in years, but as soon as I saw this post I was thinking " orange-white orange, green-white blue, blue-white green, brown-white brown". Is it the same with cat 6 now?

    • redlemace@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      3 months ago

      Did just that and got full-duplex link (don’t ask me how I know you get half duplex with your own pairing scheme)