I would really appreciate it if nobody looked at the PS/2 to USB adapter currently on my workbench, kplzandthx.
could you attach a picture of it? i want to be sure i don’t accidentally look at it by mistake
You’ve been warned.
Oh no… I looked at it… I shouldn’t have done that.
It’s beautiful, thank you
I can’t make sense of it. Where is the PS/2 and the USB port?
Yeah, not the best angle. The PS/2 port is that little silver box. The USB-C port is on the PCB. This was assembled to go inside a vintage keyboard to semi-permanently convert it, but I’ve been using it to test other boards. If a board is fully intact, I’ll just use an external converter, but there used to be a practice of snipping the cables on hardware that businesses retired for accounting purposes if they were written off, which can be a good, if risky, way to get an eBay buy for cheap.
I may have recently retired my IBM->PS/2->USB daisy chain because I was gifted a modern mechanical keyboard…
Well, I fell pretty deep into that rabbit hole, where I’ve even designed a couple of primitive circuit boards and hand-wired a bunch of keyboards. I also mess around with vintage stuff a bit.
This particular converter is programmable and meant to be used with a not mechanical 122-key terminal keyboard made by the company that took over IBM’s US keyboard factory, but it’s been hanging out with several DuPont wires shoved into it to connect it to a molex connector to test a different old board.
Somehow that VGA port became a cenobite.
It has such sights to show you.
The images that have traversed my wire span the entirety of sensation, from the darkest pits of depravity to the… Wait, no, that’s it.
Plot of the next disney hellraiser movie
“Welcome to Zombocom.”
This is zombocom
You can do anything at Zombocom
WEEEEELCOME…tozombocom
This is Zombocom
The only limit is your imagination.
This is zombocom and welcome to you have come to zombocom!
I wonder… do we have any kind of cablegore or tech gore community around here?
Be the change you want to see in the world.
I’ll join you.
The power of Bogatin compels you!
😂 that’s great
That’s not Zombo COM1:, that’s the serial port, the one above it. This is Zombo VGA.
Wait until you realize you only need 4 of those pins.
Didn’t someone do a test and an old wire hanger worked as well as an audio connector as an expensive wire?
This reminds me of how my speakers work.
I have a 3.5mm jack for my speakers that converts to an RCA jack at the end, I also have T-intersection that goes between an amplifier and the RCA jack to intercept the signal and send it BACK to a set of desktop speakers.
Why? Bootleg surround sound, I know it’s just stereo, but hey, more speakers! Also it sounds better, and it can get louder.
It may get louder, but does it go to eleven?
I have an old Logitech 5.1 surround system, and there is a “stereo x2” setting that’s pretty much exactly that.
i appreciate the title very much!
The only limit is yourself!
This reminds me of The Etherkiller
Normal harddrives and cdroms want +5VDC and +12VDC. We give them 120 VAC. They like it. Ohhh, they like it.
🤣
More power = more gooder
You should see some of the contraptions I’ve done (or had done) over the years. Like basically taking a a BGA FPGA off the board, soldering wires to the pads, and soldering the other ends to the balls of a different brand of FPGA to get something working while switching suppliers.
Please tell me you took pics.
The prototype exists - somewhere - in my office, but I can’t provide pictures, sorry.
:(
This guy made a sad face. You have to provide a picture now. We can’t sleep unless you do!
Put the “eh” in NDA
:(
VGA stands for “vestigial garbage adapter” after all.
Ouch, I just assumed it was the serial port and didn’t even look how it’s reversed. There must be all kinds of fun things you can do by hand-writing VGA data.
The VGA connector is actually reversible! Once. given enough force. It also doesn’t actually work properly when installed upside down.
Well, by “reversed” I meant that the cable has pins, and the computer has slots, what is the inverse of serial. Not that it’s upside down.
You can’t plug a serial cable in it and make it work, no matter how much force you apply. You can probably do the opposite, and plug a VGA cable on the serial port with the exact right amount of force, though.
All connectors are compatible given enough violence.
I am so conflicted about this meme; on the one hand I’m in awe at this bodge into the RCA port and on the other the caption made my eye twitch.
Had a cat engine in a crane once. A pin got damaged fir the ecm. Cat said 5k + labour to replace ecm plug. I said fuck you and any one that may slightly resemble you my good man. Went back to yard. Wittled down and ramed a solid 14awg wire in the hole. Been fine for over 5 years now.
They thought they had your nuts in a vise. But all they had was acorns.
I’ve been there before.
Was trying to figure out how a still functional but LOOOOOOOOOONG since defunct companies sensor worked.
